The shell has been fabricated from tested quality steel duly welded, comprising of base frame, peripheral structure, self draining roof, entry doors and windows (as per client requirements). The eight corners are sufficiently strengthened to facilitate transportation, lifting and placing. The base frame is be made of pressed mild steel channel section. The side and end frame have been made out of pressed sections with suitable Profiles/pillars with sufficient strength; Exterior walls are made from 18swg. MS specially corrugated sheet. The steel sheet are treated for corrosion resistant. Panels are vertically corrugated, continuously welded to top side and base structure. So as to offer better strength to weight ratio. All gaps are sealed at edges and at seams, bottom etc to prevent ingress of moisture.

· 20' = 60x60mm Square Pipe with 4mm thickness

· On the bottom frame 18 mm thick plywood, bison panel/E board are fixed by means of self taping screw.

Self draining type roof are made out of 18 swg. · M.S. sheet, adequate roof bows are provided. · Roof are adequately cambered for draining rain water.

· Main door of the container fabricated by same material 3 feet width and 7 feet height and the frame of main door can be fabricated by 40mm squire tube with 3mm thickness. · Main inner door would be Flush Door with wooden frame and Vision Panel (Size 3 x 1), with door closer and modular lock facility to maintain air condition.

· Standard windows 3 x 2 are provided.
· Aluminum framed with sliding glass (4mm thickness of glass) window are provided with finger press lock system.

Floor would be covered by vinyl mat to give smooth, richness and easy cleaning

Wooden (white paddock) box framing to fix Mdf of container interior side roof and the wood frame thickness 1.5 x 1.5 inches.
· MDF thickness 6mm fixed by nails.
· Between the containers outer wall (Cordon steel) and inner wall the 50mm gap to be filled by Thermopolis to control weather (Heat and Cold).
· The roof interior portion of the container would be insulated with Thermopolis with 50mm (6 inch) thickness.
· The all side (four) interior portion of the container would be insulated with Thermopolis with 50mm (2 inch) thickness.
· Front side of the container electric power, spilt or window air condition and telephone provision can be fabricated with metal door.
Alternatively, 9mm PVC Side Panelling or Cement fiber sheets Panelling May be used.

· ISO Certified standard wiring system is provided for your safety. · Concealed wiring with switches provided. · 16 amps tripper is provided at the Main Entrance door to switch all electric power points (5 Power Points). · 20 amps tripper can be provided for Air condition. · Bottom of window 1 No’s of telephone socket is provided. · Two side top of the window each 1 No of electric power 5 amps 5 pin socket are provided. · Two No’s of double fitting tube light will be provided. No Fan provision, if you required it’ll be extra cost.

· The Container have a 1st coat for Zinc Phosphate primer of 1 Coat · 2nd Asian Enamel paint for final 2 coats.